English
Metal Hanger Flats mirrors Ref. 00769
2 Stainless steel mirror hanger metal plates 600x45mm / 100x45 mm and 16 mm separation from the wall.
Installed or not, in the mirror of your selection.
Stainless steel plate that is fixed to the back of the mirror glass by means of special mirror silicone and is used to hang it on the wall. In this way the mirror is suspended and no type of support is seen. This system is hidden in the back of the mirror and allows you to put on and remove the mirror whenever you want.
In case you need us to install them, you must tell us what position the mirror will have, A or B, click on the image to see all the images.
This price includes the 2 plates installed on the mirror of your selection, the price of the mirror is not included.
The color and finish of the image is indicative.
Important
When you take the measurements, use a quality meter; If not, there may be differences between the measurements you take and the ones we send you. Glass is a very fragile material so it cannot be very tight to rigid frames.
To prevent it from breaking due to expansion, the glass should always measure 4 mm less than the place where it should be installed, both in width and height. The space that remains free must be filled with silicone.
Type and color
Transparent: Fully transparent glass with a very light shade greenish.
Absolute Black: Transparent black glass.
Anti-slip Dot: Transparent glass with points that makes it anti-slip.
Semi Transparent Anti-slip: Glass with a non-slip treatment, which reduces its transparency.
White: Completely opaque white glass.
Blue: Transparent blue glass.
Bronze: Bronze colored mirror (similar to old mirrors).
Clarglass: Crystal with slightly opaque engraving.
Clarglass New: Glass with small slightly opaque engraving.
Yellow: Transparent yellow glass.
Orange: Transparent orange glass.
Red: Transparent red glass.
Polar White: Transparent white glass.
Lacobel Pure White RAL-9003: Opaque white RAL-9003 glass.
Lacobel White RAL-9010: Opaque white RAL-9010 glass.
Lacobel Classic Black RAL-9005: Opaque glass color Black RAL-9005.
Lacobel Light Brown RAL-1236: Opaque light brown RAL-1236.
Lacobel Dark Brown RAL-8017: Opaque glass dark brown RAL-8017.
Lacobel Metal Gray RAL-9006: Opaque glass color RAL-9006 gray.
Lacobel Classic Orange RAL-2001: Opaque glass in Orange RAL-2001.
Lacobel Luminous Red RAL-1586: Opaque Orange color glass RAL-1586.
Matte: Slightly opaque and slightly white glass.
Extra Clear Optic: Glass without iron oxides that makes it especially transparent, without the traditional greenish color of the crystals.
Parsol Bronze: Slightly opaque and slightly brown glass.
Parsol Gris: Slightly opaque and slightly gray glass.
Silver: Silver colored mirror (it is the usual mirror).
Transparent Brown: Slightly opaque and slightly brown glass.
Transparent Anti Noise: Transparent glass that has a sheet that reduces noise transmission.
Selective Transparent: Transparent glass that contains a solar filter to reduce the passage of heat.
Velglass: Acid-treated glass on one side for a high-quality anti-reflective finish. Eliminates annoying light reflections generated under certain lighting conditions.
Spy Glass: It is used to separate two areas with different luminosities for surveillance purposes, since it allows you to see without being seen, from a dark place to a light place. Consequently, the effect of the Crystal Spy is guaranteed only when there is a difference in lighting.
Edges
If the edging is going to be seen (tables, shelves, etc.) we recommend polished edges because they have a better finish.
Corners
For houses with children or public places we recommend bunt corners or round corners for more safety, since this way possible impacts with the right angle of the glass are avoided.
Holes
The holes will be made by default 10 mm in diameter, please attach a drawing or plan indicating where you want them. In case you want another diameter, contact us through e-mail, phone or Whatsapp.
Edges
If the edging is going to be seen (tables, shelves, etc.) we recommend polished edges because they have a better finish.
Select the most suitable length and width for your needs. If you need measurements larger than the accepted maximums, contact us.
Select the most suitable length and width for your needs. If you need measurements larger than the accepted maximums, contact us.
Metal hanger deck mirrors inox