Wire reinforced glass is a printed monolithic glass bearing incorporated therein a metal mesh welded 11x11mm square lattice. They are considered safety glasses, since in case of breakage the pieces are attached to the mesh avoiding their fall and that these can cause injuries. This makes it suitable for risk areas and where additional security is needed, although it is not an anti-theft glass.
POINTS - NORMAL
THICKNESS - 6MM
EDGES - POLISHED EDGE
TYPE AND COLOR - TRANSPARENT
Wired Glass is a printed glass that incorporates inside a welded square grid metal mesh, 11 x 11 mm. They are considered safety glass, since in the event of breakage, the pieces remain attached to the mesh, preventing them from falling and causing injuries. This makes it suitable for risk areas and where additional security is needed, although it is not an anti-theft glass. 6 mm thick transparent custom reinforced glass, with polished edges to prevent cutting.
Transparent cut to size glass, 6 mm thick, with polished edges to prevent cuts.
FUN FACT: Wired glass was manufactured for the first time in 1886 by the German August F. Siemens.
APPLICATIONS: Glass for Skylights, Glass for framed doors, Glass for windows, Safety glass for roofs of pergolas, porches and terraces.
IMPORTANT: When taking the measurements, use a quality meter, if this is not the case, there may be differences between the measurements that you take and those that we send you. Glass is a very fragile material, it cannot be very tight to rigid frames. To prevent it from breaking due to expansion, the glass will always measure both in width and height 4 mm less than that of the place where it should be installed. The free space must be filled with silicone.